431 SUS431 X17CrNi16-2 1.4057 Martensitic Stainless Steel Seamless Pipe
431 SUS431 X17CrNi16-2 1.4057 Martensitic Stainless Steel Seamless Pipe

Item specifics

length range
1-9meter
Delivery condition
Harden
Surface condition
Acid pickling / polished

Review

Description

Introduction
Grade 431 stainless steels are martensitic, heat-treatable grades with excellent corrosion resistance, torque strength, high toughness and tensile properties. All these properties make them ideal for bolt and shaft applications. These steels, however, cannot be cold-worked owing to their high yield strength, hence they are suitable for operations such as spinning, deep drawing, bending or cold heading.
Application
Typical applications of grade 431 stainless steels include the following:
Laboratory equipment
Marine systems
Beater bars
Pump and propeller shafts
Nuts and bolts
Product Details
Outside diameter range: 6-219mm
Wall thickness range:1-25.4 mm
Delivery condition: Harden
Surface condition: Acid pickling / polished
Produce Process
Seamless Steel Pipe Process: Round bar→punched→grinded surface→annealed→grinded surface→acid pickling→cold rolled→annealed→Acid pickling or polished→cutting length→package
Inspection and Test
Chemical, Tensile test, intergranular corrosion, flat test, expand test, nonmetallic inclusion, hydraulic test. 
Package
Tubes will bundled by steel strip and not exceed 3 tons each batch. If thin wall thickness, we will put it into wooden case.
Equipment