52100 100Cr6 1.3505 Spheroidized Annealed Cold Drawn Bearing Steel Wire
Item specifics
- Diameter range :
- 1-15 mm
- Delivery condition :
- Speroidized annealed
- Surface condition :
- Smooth,bright
Review
Description
Products:
Have good comprehensive performance. have the high and uniform hardness after quenched and tempered. Have good performance in cutting and processing after spheroid annealing.
Application:
Used for general plastic mould, automobile, machine tool bearings, ball, roller, shaft sleeve, guide pin,guide pin bushing
Comparable Standards:
AISI/SAE | DIN | JIS | GB |
52100 | 100Cr6 | SUJ2 | GCr15 |
Chemical Composition:
C | Si | Mn | P | S | Cr | Ni | Cu |
0.95-1.05 | 0.15-0.35 | 0.25-0.45 | ≤0.025 | ≤0.025 | 1.4-1.6 | ≤0.25 | ≤0.25 |
Mechanical property:
1. tensile strength σb(MPa):≥1617
2. impactAkv(J):≥28
3. hardness after heat treatment: 58-62HRC
Heat treatment:
Quenched at 850~860℃, cold by oil, tempered at 160℃ in 2h
Size mm | Tolerance mm | Ovality mm |
Φ1.5-Φ3.0 | ±0.01 | ≤0.01 |
Φ3.1-Φ6.0 | ±0.015 | ≤0.015 |
Φ6.1-Φ16.0 | ±0.018 | ≤0.018 |
Φ16.1-Φ20.0 | ±0.02 | ≤0.020 |
Φ20.1-Φ25.0 | ±0.03 | ≤0.030 |
Delivery hardness:
Annealed condition ≤ 235HB
Quenched & tempered :58-62HRC
