525A58 Hot Rolled Spring Steel Flat Bar
- Model
- 525A58
Item specifics
- Width
- 40-160mm
- Thickness
- 6-35mm
- Delivery Condition
- Hot rolled only, Quenched and Tempered
- Surface Condition
- Black surface
Review
Description
Products Details
Spring steel refers to steel due to the elasticity in the quenched and tempered condition, and specifically for the manufacture of springs and elastic components. Spring steel depends on its ability to elastically deform, i.e., within the prescribed range, the ability to withstand a certain elastic deformation so that the load does not occur in the permanent deformation after the load is removed.Spring steel flat bar is especially used for laminated leaf spring,Agricultural machinery springs,Chain products.
Quality Standard
BS 970:Part 2: 1988 for Wrought steels for mechanical and allied engineering purposes Part 2. Requirements for steels for the manufacture of hot formed springs
Chemical Composition(%)
Steel Grade | C | Si | Mn | P | S | Cr | Mo |
525A58 | 0.56-0.60 | 0.20-0.35 | 0.80-0.95 | 0.035 max | 0.035 max | 0.70-0.85 | 0.10 max |
Mechanical Properties(Quenched and Tempered Condition)(T=20°C if not differently stated)
Steel Grade | Tensile Strength Rm (Mpa) | Yield Strength Rp0.2 (Mpa) | Elongation A5 (%) | Area Reduction Ratio C (%) |
525A58 | 1225 min | 1080 min | 9 min | 20 min |
Heat Treatment
Steel Grade | Quenching Temperature (°C) | Media | Tempering Temperature (°C) |
525A58 | 830-860 | oil | 460-510 |
