100CrMn6 1.3520 High Carbon-Chromium Bearing Steel Round Bar
100CrMn6 1.3520 High Carbon-Chromium Bearing Steel Round Bar

100CrMn6 1.3520 High Carbon-Chromium Bearing Steel Round Bar

Model
100CrMn6, 1.3520

Item specifics

Diameter
20-180mm
Similar steel grades
100CrMn6, 1.3520
Delivery condition
hot rolled+ spheroidizing annealing
Surface condition
black, bright

Review

Description

Introduction:

Professional manufacturer of asphalt machines. Our sales and R&D team have over 10 years’ experience to focus on asphalt distributor, synchronous pavement surface vehicles and other road machinery and equipment. Based on innovation

Quality Standard:

DIN 17230-1980 Ball and Roller Bearing Steels

All Grades Comparison:

Material No. 1.3520; EN 100CrMn6

Chemical Composition(%):

C

Si

Mn

P

S

Cr

Ni

Cu

0.90-1.05

0.50-0.70

1.00-1.20

0.030 max

0.025 max

1.40-1.65

0.30 max

0.30 max

Heat treatment:

l NORMALIZING: Normalizing temperature: 860-900℃.

l SOFT ANNEALING: Heat to 760-800℃, cool slowly in furnace. This will produce a maximum Brinell hardness of 217.

l STRESS RELIEVING: Stress relieving to remove machining stresses should be carried out by heating to approx. 650℃, holding for 1-2 hours at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.

l HARDENING: Harden from a temperature of 830-890℃ followed by oil quenching. Hardness after quenching is approx. 64 HRC.

l TEMPERING: Tempering temperature: 150-180℃.

recommend

100Cr2 1.3501 High Carbon-Chromium Bearing Steel Round Bar

100Cr2 1.3501 High Carbon-Chromium Bearing Steel Round Bar

Model : 100CrMn6, 1.3520

52100 100Cr6 SUJ2 Bearing Steel Bar

52100 100Cr6 SUJ2 Bearing Steel Bar

Model : 100CrMn6, 1.3520

KeyWords