M41 T11341 1.3246 HS2-9-1-8 High Speed Tool Steel Bar
- Model
- M41 T11341 1.3246 HS2-9-1-8
Item specifics
- Delivery condition
- Cold drawn only
- Surface Condition
- Smooth
- Diameter
- 10-180mm
- Tolerance
- h8, h9, h10
Review
Description
M41 T11341 1.3246 HS2-9-1-8 High Speed Tool Steel
M41 high speed steel American standard steel molybdenum high speed tool steel. The main features are fine carbide particles, uniform distribution, good toughness, but decarburization sensitivity and overheating sensitivity, thermal processing and heat treatment range narrow.
Features
This alloy is a High Speed, tungsten, molybdenum containing tool steel. It has good toughness along with hardness and is lower in cost than an equivalent tungsten (W) tool steel.
Applications
Primary application is as cutting tools for machining operations.
Equvialent
China GB standard grades W7Mo4Cr4V2Co5,
American AISI / ASTM standard M41,
United States UNS standard grade T11341,
International Organization for Standardization (ISO) standard grade HS2-9-1-8,
French NF standard grade HS7-4-2-5,
German DIN standard grade S74-2-5,
Germany DIN standard material number 1.3246,
British BS standard grade M41
Chemical composition
C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Mo(％) | V(%) | W(%) | Co(%) |
1.05-11.5 | 0.15-0.50 | 0.20-0.60 | ≤0.030 | ≤0.030 | 3.75-4.50 | 3.25-4.25 | 1.75-2.25 | 6.25-7.00 | 4.75-5.75 |
Mechanical properties
Yield | Tensile | Impact | Elongation | Reduction in cross section on fracture | As-Heat-Treated Condition | Brinell hardness (HBW) |
439 (≥) | 931 (≥) | 41 | 41 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 221 |
Machinability
Machinability of M41 is rated at 55% that of the W group water hardening low alloy tool steels which are at 100% as a machinability reference.
Forming
Forming of the alloy may be done in the annealed condition be conventional methods.
Heat Treatment
Preheat at 1450 F and then rapidly heat to 2250 F. Hold parts for 2 to 5 minutes and air cool, salt bath or oil quench.
Annealing:
Anneal at 1600 - 1650 F and slow cool in the furnace at less than 40 F per hour.
Tempering:
Temper at 1000 to 1100 F for at least one hour at temperature. Repeating the tempering operation twice more, for a triple temper, is recommended. Rockwell C hardness will be in the range of 70 to 65.
Forging
Forge at 2100 F down to 1750 F. Do not forge below 1700 F.
Cold Working
Cold working of M41 in the annealed condition may be done by conventional methods.
