JIS G3441 Alloy Steel Tubes for Machine Purposes
- Model
- JIS G3441
Item specifics
- Delivery condition
- +A or +N or +QT
- Surface condition
- black or peeled or polished
Review
Description
JIS G3441 Alloy Steel Tubes for Machine Purposes
alloy steel tubes used for machinery, automobiles and other machine parts
JIS G3441 Alloy Steel Tubes Dimensions and dimensional tolerances
Outside diameter: 20-800mm
Wall Thickness: 1-150mm
tolerance: +/-1% OD ; +/- 12.5% WT
JIS G3441 Alloy Steel Tubes Chemical Component
Designation of grade | C | Si | Mn | P | s | Ni | Cr | Mo | Cu |
SMn420TK | 0.17 to 0.23 | 0.15 to 0.35 | 1.20 to 1.50 | 0.030 max. | 0.030 max. | 0.25 max. | 0.35 max. | / | 0.30 max. |
SMn433TK | 0.30 to 0.36 | 0.15 to 0.35 | 1.20 to 1.50 | 0.030 max. | 0.030 max. | 0.25 max. | 0.35 max. | / | 0.30 max. |
SMn438TK | 0.35 to 0.41 | 0.15 to 0.35 | 1.35 to 1.65 | 0.030 max. | 0.030 max. | 0.25 max. | 0.35 max. | / | 0.30 max. |
SMn443TK | 0.40 to 0.46 | 0.15 to 0.35 | 1.35 to 1.65 | 0.030 max. | 0.030 max. | 0.25 max. | 0.35 max. | / | 0.30 max. |
SMnC420TK | 0.17 to 0.23 | 0.15 to 0.35 | 1.20 to 1.50 | 0.030 max. | 0.030 max. | 0.25 max. | 0.35 to 0.70 | / | 0.30 max. |
SMnC443TK | 0.40 to 0.46 | 0.15 to 0.35 | 1.35 to 1.65 | 0.030 max. | 0.030 max. | 0.25 max. | 0.35 to 0.70 | / | 0.30 max. |
SCM15TK | 0.13 to 0.18 | 0.15 to 0.35 | 0.60 to 0.90 | 0.030 max. | 0.030 max. | 0.25 max. | 0.90 to 1.20 | / | 0.30 max. |
SCM20TK | 0.18 to 0.23 | 0.15 to 0.35 | 0.60 to 0.90 | 0.030 max. | 0.030 max. | 0.25 max. | 0.90 to 1.20 | / | 0.30 max. |
SCr430TK | 0.28 to 0.33 | 0.15 to 0.35 | 0.60 to 0.90 | 0.030 max. | 0.030 max. | 0.25 max. | 0.90 to 1.20 | / | 0.30 max. |
SCr435TK | 0.33 to 0.38 | 0.15 to 0.35 | 0.60 to 0.90 | 0.030 max. | 0.030 max. | 0.25 max. | 0.90 to 1.20 | / | 0.30 max. |
SCM40TK | 0.38 to 0.43 | 0.15 to 0.35 | 0.60 to 0.90 | 0.030 max. | 0.030 max. | 0.25 max. | 0.90 to 1.20 | / | 0.30 max. |
SCM45TK | 0.43 to 0.48 | 0.15 to 0.35 | 0.60 to 0.90 | 0.030 max. | 0.030 max. | 0.25 max. | 0.90 to 1.20 | / | 0.30 max. |
SCM415TK | 0.13 to | 0.15 to | 0.60 to | 0.030 | 0.030 | 0.25 | 0.90 to | 0.15 to | 0.30 |
| 0.18 | 0.35 | 0.90 | max. | max. | max. | 1.20 | 0.25 | max. |
SCM418TK | 0.16 to | 0.15 to | 0.60 to | 0.030 | 0.030 | 0.25 | 0.90 to | 0.15 to | 0.30 |
| 0.21 | 0.35 | 0.90 | max. | max. | max. | 1.20 | 0.25 | max. |
SCM420TK | 0.18 to | 0.15 to | 0.60 to | 0.030 | 0.030 | 0.25 | 0.90 to | 0.15 to | 0.30 |
| 0.23 | 0.35 | 0.90 | max. | max. | max. | 1.20 | 0.25 | max. |
SCM421TK | 0.17 to | 0.15 to | 0.70 to | 0.030 | 0.030 | 0.25 | 0.90 to | 0.15 to | 0.30 |
| 0.23 | 0.35 | 1.00 | max. | max. | max. | 1.20 | 0.25 | max. |
SCM425TK | 0.23 to | 0.15 to | 0.60 to | 0.030 | 0.030 | 0.25 | 0.90 to | 0.15 to | 0.30 |
| 0.28 | 0.35 | 0.90 | max. | max. | max. | 1.20 | 0.30 | max. |
SCM430TK | 0.28 to | 0.15 to | 0.60 to | 0.030 | 0.030 | 0.25 | 0.90 to | 0.15 to | 0.30 |
| 0.33 | 0.35 | 0.90 | max. | max. | max. | 1.20 | 0.30 | max. |
SCM432TK | 0.27 to | 0.15 to | 0.30 to | 0.030 | 0.030 | 0.25 | 1.00 to | 0.15 to | 0.30 |
| 0.37 | 0.35 | 0.60 | max. | max. | max. | 1.50 | 0.30 | max. |
SCM435TK | 0.33 to | 0.15 to | 0.60 to | 0.030 | 0.030 | 0.25 | 0.90 to | 0.15 to | 0.30 |
| 0.38 | 0.35 | 0.90 | max. | max. | max. | 1.20 | 0.30 | max. |
SCM440TK | 0.38 to | 0.15 to | 0.60 to | 0.030 | 0.030 | 0.25 | 0.90 to | 0.15 to | 0.30 |
| 0.43 | 0.35 | 0.90 | max. | max. | max. | 1.20 | 0.30 | max. |
SCM445TK | 0.43 to | 0.15 to | 0.60 to | 0.030 | 0.030 | 0.25 | 0.90 to | 0.15 to | 0.30 |
| 0.48 | 0.35 | 0.90 | max. | max. | max. | 1.20 | 0.35 | max. |
SCM822TK | 0.20 to | 0.15 to | 0.60 to | 0.030 | 0.030 | 0.25 | 0.90 to | 0.35 to | 0.30 |
| 0.25 | 0.35 | 0.90 | max. | max. | max. | 1.20 | 0.45 | max. |
SNC236TK | 0.32 to 0.40 | 0.15 to 0.35 | 0.50 to 0.80 | 0.030 max. | 0.030 max. | 1.00 to 1.50 | 0.50 to 0.90 | / | 0.30 max. |
SNC415TK | 0.12 to 0.18 | 0.15 to 0.35 | 0.35 to 0.65 | 0.030 max. | 0.030 max. | 2.00 to 2.50 | 0.20 to 0.50 | / | 0.30 max. |
SNC631TK | 0.27 to | 0.15 to | 0.35 to | 0.030 max. | 0.030 max. | 2.50 to | 0.60 to | / | 0.30 max. |
0.35 | 0.35 | 0.65 | 3 | 1 | |||||
SNC815TK | 0.12 to | 0.15 to | 0.35 to | 0.030 max. | 0.030 max. | 3.00 to | 0.60 to | / | 0.30 max. |
0.18 | 0.35 | 0.65 | 3.5 | 1 | |||||
SNC836TK | 0.32 to | 0.15 to | 0.35 to | 0.030 max. | 0.030 max. | 3.00 to | 0.60 to | / | 0.30 max. |
0.4 | 0.35 | 0.65 | 3.5 | 1 | |||||
SNCM220TK | 0.17 to | 0.15 to | 0.60 to | 0.030 max. | 0.030 max. | 0.40 to | 0.40 to | 0.15 to | 0.30 max. |
0.23 | 0.35 | 0.9 | 0.7 | 0.6 | 0.25 | ||||
SNCM240TK | 0.38 to | 0.15 to | 0.70 to | 0.030 max. | 0.030 max. | 0.40 to | 0.40 to | 0.15 to | 0.30 max. |
0.43 | 0.35 | 1 | 0.7 | 0.6 | 0.3 | ||||
SNCM415TK | 0.12 to | 0.15 to | 0.40 to | 0.030 max. | 0.030 max. | 1.60 to | 0.40 to | 0.15 to | 0.30 max. |
0.18 | 0.35 | 0.7 | 2 | 0.6 | 0.3 | ||||
SNCM420TK | 0.17 to | 0.15 to | 0.40 to | 0.030 max. | 0.030 max. | 1.60 to | 0.40 to | 0.15 to | 0.30 max. |
0.23 | 0.35 | 0.7 | 2 | 0.6 | 0.3 | ||||
SNCM431TK | 0.27 to | 0.15 to | 0.60 to | 0.030 max. | 0.030 max. | 1.60 to | 0.60 to | 0.15 to | 0.30 max. |
0.35 | 0.35 | 0.9 | 2 | 1 | 0.3 | ||||
SNCM439TK | 0.36 to | 0.15 to | 0.60 to | 0.030 max. | 0.030 max. | 1.60 to | 0.60 to | 0.15 to | 0.30 max. |
0.43 | 0.35 | 0.9 | 2 | 1 | 0.3 | ||||
SNCM447TK | 0.44 to | 0.15 to | 0.60 to | 0.030 max. | 0.030 max. | 1.60 to | 0.60 to | 0.15 to | 0.30 max. |
0.5 | 0.35 | 0.9 | 2 | 1 | 0.3 | ||||
SNCM616TK | 0.13 to | 0.15 to | 0.80 to | 0.030 max. | 0.030 max. | 2.80 to | 1.40 to | 0.40 to | 0.30 max. |
0.2 | 0.35 | 1.2 | 3.2 | 1.8 | 0.6 | ||||
SNCM625TK | 0.20 to | 0.15 to | 0.35 to | 0.030 max. | 0.030 max. | 3.00 to | 1.00 to | 0.15 to | 0.30 max. |
0.3 | 0.35 | 0.6 | 3.5 | 1.5 | 0.3 | ||||
SNCM630TK | 0.25 to | 0.15 to | 0.35 to | 0.030 max. | 0.030 max. | 2.50 to | 2.50 to | 0.50 to | 0.30 max. |
0.35 | 0.35 | 0.6 | 3.5 | 3.5 | 0.70 b) | ||||
SNCM815TK | 0.12 to | 0.15 to | 0.30 to | 0.030 max. | 0.030 max. | 4.00 to | 0.70 to | 0.15 to | 0.30 max. |
0.18 | 0.35 | 0.6 | 4.5 | 1 | 0.3 | ||||
SACM645TK | 0.40 to | 0.15 to | 0.60 max. | 0.030 inax. | 0.030 max. | 0.25 max. | 1.30 to | 0.15 to | 0.30 max. |
0.5 | 0.5 | 1.7 | 0.3 |
JIS G3441 Alloy Steel Tubes Manufacturing method
The manufacturing method shall be as follows.
a) The tubes shall be manufactured by combination of the tube manufacturing method and the finishing method indicated in Table 1. If required, the appropriate heat treatment may be designated on tubes.
b) If required, the purchaser may designate the heat treatment.
c) The shape of end of tube shall be plain-ended, unless otherwise specified.
JIS G3441 Alloy Steel Tubes Flattening resistance
Electric resistance welded steel tubes shall be tested in accordance with 9.2, without cracks on the weld of test pieces when the distance between the plates is seven eighth of outside diameter. When agreed between the purchaser and the manufacturer, the
specifications for flattening resistance may not be applied.
JIS G3441 Alloy Steel Tubes Appearance
The appearance shall be as follows.
a) The tubes shall be straight for practical purposes and the both ends thereof shall be at right angles to the tube axis.
b) The tubes shall be smoothly finished and free from defects detrimental to use.
c) The tubes may be repaired by grinding, machining or other methods, provided that the wall thickness after repair still satisfies the specified tolerances on the wall thickness.
d) The surface of repaired part shall be smooth along the contour of the tube.
e) When there is a special request concerning the surface finishing of tubes, it shall be upon the agreement between the purchaser and the manufacturer.
JIS G3441 Alloy Steel Tubes Marking
Each tube which passed the inspection shall be marked with the following items. The arrangement of marking is not specified. Addition of boron, when designated, shall be suffixed to the designation of grade. When tubes of smaller outside diameter are used or when there is a special request by the purchaser, marking may be applied on a bundle by an appropriate method. When approved by the purchaser, part of the items may be omitted to such extent that the product can be identified
JIS G3441 Alloy Steel Tubes Test
Tensile test
Charpy pendulum impact test
Brinell hardness test
Vickers hardness test
Rockwell hardness test
Grain size test
Non-metalic inclusion test
Determination test of depth of decarburization
Hardenability test
Ultrasonic examination
Eddy current examination
