446 S44600 X10CrAlSi25 1.4762 Ferritic Stainless Steel Seamless Pipe
446 S44600 X10CrAlSi25 1.4762 Ferritic Stainless Steel Seamless Pipe

Item specifics

Outside diameter range
40-300mm
Delivery condition
Harden
Surface condition
Acid pickling / polished

Review

Description

Introduction
Ferritic grades have been developed to provide a group of stainless steel to resist corrosion and oxidation, while being highly resistant to stress corrosion cracking. These steels are magnetic but cannot be hardened or strengthened by heat treatment. They can be cold worked and softened by annealing. As a group, they are more corrosive resistant than the martensitic grades, but generally inferior to the austenitic grades. Like martensitic grades, these are straight chromium steels with no nickel. They are used for decorative trim, sinks, and automotive applications, particularly exhaust systems.
Quality Standards
ASTM/ASME A/SA268 Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service.
ASTM/ASME A/SA803 Welded Ferritic Stainless Steel Feed Water Heater Tubes.
EN 10297-2 Seamless circular stainless steel tube for mechanical and general engineering purpose
Product Details
OD range: 6-219mm(0.2-8.6 inch)
WT range:0.5-25mm(0.02-1 inch)
Length range:1-12 meter(3-40 foot)
Tolerance on hot rolled condition: OD+/-1%, WT+/-10%
Tolerance on cold drawn/rolled condition: OD +/-0.5%, WT+/- 0.15mm
Delivery condition: Harden/Annealed
Surface condition: Acid pickling / polished
Steel Grade Comparison
ASTM&AISI: 405, 430, 439, 444, 446
EN&DIN: 1.4002, 1.4724, 1.4016, 1.4510 1.521, 1.4742, 1.4762
EN&DIN: X6CrAl13, X10CrAlSi13, X6Cr17,X3CrTi17,X2CrMoTi18-2,X10CrAlSi18,X10CrAlSi25
JIS: SUS405,SUS430
Tube ends
The tubes come with square cut and deburred ends or beveled end with plastic caps.
Certification
The product is supplied with 3.1.B inspection certificate, according to the standards EN 10204 and ISO 10474.
Identification and Marking
Steel Pipe are marked in indelible ink, the details being repeated along the entire length of each tube and on a label, as follows:
Manufacturer’s trademark – manufacturing standard – dimensions -steel grade – supply condition – cast no. – item number.
Produce Process
Seamless Steel Pipe Process: Round bar→punched→grinded surface→annealed→grinded surface→acid pickling→cold rolled→annealed→Acid pickling or polished→cutting length→package
Inspection and Test
Chemical, Tensile test, intergranular corrosion, flat test, expand test, nonmetallic inclusion, hydraulic test. 
Package
Tubes will bundled by steel strip and not exceed 3 tons each batch. If thin wall thickness, we will put it into wooden case.
Equipment