AISI H12 Hot Work Tool Steel
AISI H12 Hot Work Tool Steel
Model
H12

Item specifics

Process
hot rolled or hot forged
Delivery Condtion
annealed
Surface Condition
smooth, bright

Review

Description

AISI H12 Hot Work Tool Steel 

 

AISI h12 tool steel is a 4.75~5.5% chromium, general-purpose hot work steel. H12 tool steel contains (0.2~0.5%) less vanadium than the widely-used H13 hot works tool steel (0.8~1.2%). 

    Grade :

    X35CrWMoV5

    Number:

    1.2605

    Classification:

    Hot-work tool steel

    Standard:

EN ISO 4957: 2000 Tool steels

 

H12 Tool Steel and Equivalent Chemical Composition

ASTM A681

C

Mn

P

S

Si

Cr

V

W

Mo

Ni

Cu

Sn

H12/T20812

0.30

0.40

0.20

0.60

0.03

0.03

0.80

1.25

4.75

5.50

0.20

0.50

1.00

1.70

1.25

1.75

DIN ISO 4957

C

Mn

P

S

Si

Cr

V

W

Mo

 

 

 

1.2605/X35CrWMoV5

0.32

0.40

0.20

0.50

0.03

0.02

0.80

1.20

4.75

5.50

0.20

0.50

1.10

1.60

1.25

1.60

JIS G4404

C

Mn

P

S

Si

Cr

V

W

Mo

 

 

 

SKD62

0.32

0.40

0.20

0.50

0.03

0.02

0.80

1.20

4.50

5.50

0.20

0.50

1.00

1.60

1.00

1.60

BS 4659

C

Mn

P

S

Si

Cr

V

W

Mo

 

 

 

BH12

0.30

0.40

0.40

0.35

0.35

0.85

1.15

4.75

5.25

0.50

1.25

1.75

1.25

1.75

0.40

0.20

0.0

 

AISI H12 Tool Steels Standard and Relevant Steel Specifications

Country

USA

German

Japan

British

Standard

ASTM A681

DIN EN ISO 4957

JIS G4404

BS 4659

Grades

H12/T20812

1.2605/X35CrWMoV5

SKD62

BH12

 

For hot works tool steels application, we could supply some common tool steels, like H10 steel, H11 steel and H13 steel, and we could also supply AISI h12 tool steel materials for your hot works applications.

 

ASTM/AISI H12 Steel is a deep-hardening, air-hardening steel that exhibits minimal size change during heat treatmnet. H12 tool steel material has good resistance to thermal fatique cracking (heat cracking) and excellent resistnce to gross cracking and thermal shock when water cooled in service. So, we could say H-12 tool steel mainly has the following characteristics:

Excellent resistance to wear, high strength at elevated temperature.

Good homogenizing with high toughness.

Extra- fine- structure without grain-boundary carbide.

Inclusion shape controlled with high cleanliness.

 

ASTM H12 Tool Steel Supply Range

H-12 Steels Bar: diameter 8mm–1000mm
H12 Steel Flat: thickness 16-500mm x width 200-800mm
H12 Steels Plate: thickness 16-500mm x width 200-810mm
Other dimension according to your requirements

 

Surface Finish: Black, Rough Machined, Peeled, Turned or as per given requirements.

 

H12 Hot Work Tool Steel Mechanical Properties

Modulus of elasticity [103 x N/mm2]: 207

Density [g/cm3]: 7.84

Thermal conductivity [W/m.K]: 18.9

Coefficient of Linear Thermal Expansion 10-6 oC-1

20-100oC

20-200oC

20-400oC

20-600oC

9.8

11

12.1

13

 

Forging of H12 Tool Steel

Hot forming temperature: 1100-850oC.

 

H12 Tool Steel Heat Treatment

Annealing

Heating Steel H-12 slowly and uniformly to 845~900℃, furnace cooling to 540℃ at a rate 10~20℃/hr. Hardness HB 229 max

Stress Relieving

Stress relieving to remove machining stresses should be carried out by heating H12 steel to approx.650oC, holding for 1-2 hours at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.

Hardening

Preheating (1): Heat H-12 steel to approx. 540~650℃, holding 30 minutes per 25mm.

Preheating (2): Heat H12 tool steels to approx. 845~870℃, holding 30 minutes per 25mm.

Austenitizing: Heat steel H12 to approx. 1010~1050℃, holding 30 minutes per 25 mm.

Quenchant: By oil or air.

Tempering

Tempering temperature: 520-700oC, hold at least 2 hours, air cooling and double tempering.

 

Applications of AISI H12 Tool Steel

AISI H12 hot work tool steel is usually used for hot tooling applications where maximum resistance to cracking is required. Such typical applications include the following:

Extrusion indushry: dies and inner liner for extrusion, extrusion tools

Forging Industry: forming dies, press dies

Die casting industry: dies for die-carbide

Tool Industry: hot punch, hot shear blades, immediate roller for cold rolling

 

The material X35CrWMoV5 with the standard DIN/EN is also available with at least 3 alternative names, such as eg: DIN/EN: "X35CrWMoV5" and BSI/AFNOR: "T20812" and AISI/SAE: "H12".

The norm of steel material X35CrWMoV5 is EN ISO 4957

KeyWords