1.2885 Tool Steel Flat Bar
- Model
- 1.2885 Tool Steel Flat Bar
Review
Description
1.2885 Tool Steel Flat Bar (Premium High-Speed Tool Steel)
Product Description
FUSHUN METAL's 1.2885 Tool Steel Flat Bar is a premium tungsten-molybdenum high-speed tool steel offering an exceptional combination of superior red hardness, outstanding wear resistance, excellent high-temperature strength, and good toughness. With a carefully engineered chemical composition featuring optimized proportions of tungsten, molybdenum, vanadium, and cobalt, our 1.2885 flat bar delivers extraordinary cutting performance and wear resistance at elevated temperatures. Available in precision-milled finishes and tight dimensional tolerances, this specialized flat steel bar is ideal for demanding applications in high-performance cutting tools, hot work tooling, cold work dies requiring extreme wear resistance, and other applications where maximum hardness retention at elevated temperatures is critical. Unlike conventional tool steels, FUSHUN METAL's 1.2885 flat bars provide significantly enhanced heat resistance, maintaining hardness up to 650°C (1200°F), ensuring exceptional performance in high-speed cutting and severe hot working applications. Each bar undergoes comprehensive quality control to ensure consistent properties, precise dimensions, and superior surface quality for maximum performance in the most demanding tooling applications.
Flat Bar Specifications
FUSHUN METAL offers 1.2885 Tool Steel Flat Bar in a comprehensive range of specifications to meet diverse application requirements:
Available Dimensions
| Thickness (mm) | Width (mm) | Standard Length (mm) |
|---|---|---|
| 3 - 10 | 20 - 100 | 500, 1000, 2000, 3000 |
| 11 - 20 | 30 - 150 | 500, 1000, 2000, 3000 |
| 21 - 30 | 40 - 200 | 500, 1000, 2000, 3000 |
| 31 - 50 | 50 - 300 | 500, 1000, 2000 |
| 51 - 80 | 60 - 400 | 500, 1000 |
| 81 - 100 | 80 - 500 | 500, 1000 |
* Custom dimensions available upon request
Dimensional Tolerances
| Dimension | Standard Tolerance | Precision Tolerance (Available on Request) |
|---|---|---|
| Thickness | ±0.2 mm up to 10 mm ±0.3 mm up to 30 mm ±0.5 mm up to 50 mm ±0.8 mm up to 80 mm ±1.0 mm up to 100 mm |
±0.1 mm up to 10 mm ±0.15 mm up to 30 mm ±0.25 mm up to 50 mm ±0.4 mm up to 80 mm ±0.5 mm up to 100 mm |
| Width | ±0.3 mm up to 100 mm ±0.5 mm up to 200 mm ±0.8 mm up to 400 mm ±1.0 mm up to 500 mm |
±0.15 mm up to 100 mm ±0.25 mm up to 200 mm ±0.4 mm up to 400 mm ±0.5 mm up to 500 mm |
| Length | +10 mm / 0 mm | +5 mm / 0 mm |
| Flatness | 0.3% of width | 0.15% of width |
| Straightness | 0.3% of length | 0.15% of length |
| Squareness | 0.5° max | 0.25° max |
Surface Finishes
- Hot Rolled: Standard industrial finish
- Hot Rolled and Annealed: Stress relieved for better machinability
- Hot Rolled, Annealed, and Pickled: Clean scale-free surface
- Precision Ground: Four sides ground with precision tolerances
- Fine Milled: High-quality surface finish with tight tolerances
- Polished: Smoother finish for reduced post-processing requirements
- Custom Finishes: Available upon request for specific applications
Supply Conditions
- Annealed: Soft condition for optimal machinability (225-275 HB)
- Pre-hardened: Hardened and tempered to 35-42 HRC for applications requiring moderate hardness
- Fully Heat Treated: Hardened and tempered to 63-67 HRC for immediate use
- Custom Heat Treatment: Available to meet specific hardness and toughness requirements
Packaging Options
- Individual Plastic Wrapping: For protection against environmental contaminants
- Wooden Crates: For secure shipping of multiple bars
- Steel Strapped Bundles: For economical shipping of standard orders
- VCI Paper Wrapping: For enhanced corrosion protection
- Oil Coating: Available for additional corrosion protection
- Custom Packaging: Available to meet specific handling and storage requirements
- Anti-Rust Treatment: Specialized rust prevention for long-term storage
Applications
FUSHUN METAL's 1.2885 Tool Steel Flat Bar is specifically engineered for applications requiring an optimal combination of extreme hardness, wear resistance, and hot hardness:
Cutting Tool Applications
- High-performance cutting tools for difficult-to-machine materials
- Heavy-duty milling cutters
- Form cutting tools
- Industrial circular saw blades
- Broaching tools for high-temperature applications
- Power hacksaw blades
- Metal slitting saws
- Industrial wood cutting tools
Hot Work Applications
- High-temperature punches and dies
- Hot shear blades
- Hot work tooling inserts
- Hot extrusion tooling
- Forging dies requiring extreme wear resistance
- Hot heading tools
- Hot trim dies
- Tooling for glass industry
Cold Work Applications
- High-wear cold forming tools
- Deep drawing dies for abrasive materials
- Cold extrusion dies requiring extreme wear resistance
- Blanking and punching tools for high-strength materials
- Thread rolling dies
- Coin and medal dies
- Swaging dies
- Severe cold heading dies
Specialty Applications
- Wear parts for high-temperature environments
- Measuring tools requiring dimensional stability
- Gauges and fixtures for high-temperature applications
- Knives for cutting tough materials
- Woodworking tools for abrasive materials
- Paper cutting knives
- Machine components requiring extreme wear resistance
- Custom tooling for specialized applications
Chemical Composition
FUSHUN METAL's 1.2885 Tool Steel Flat Bar features the following nominal composition per DIN 17350/EN ISO 4957 standards:
| Element | Content (%) |
|---|---|
| Carbon (C) | 0.80-0.90% |
| Silicon (Si) | 0.20-0.45% |
| Manganese (Mn) | 0.20-0.40% |
| Chromium (Cr) | 3.80-4.50% |
| Molybdenum (Mo) | 4.70-5.20% |
| Tungsten (W) | 5.50-6.70% |
| Vanadium (V) | 1.70-2.10% |
| Cobalt (Co) | 4.50-5.00% |
| Phosphorus (P) | ≤ 0.030% |
| Sulfur (S) | ≤ 0.030% |
| Iron (Fe) | Balance |
Key Element Functions
- Carbon (0.80-0.90%): Provides high hardness and forms carbides with alloying elements. The relatively high carbon content ensures maximum hardness and wear resistance.
- Tungsten (5.50-6.70%): A key element that forms hard, stable carbides providing exceptional hot hardness and wear resistance at elevated temperatures. Tungsten contributes significantly to the steel's "red hardness" and cutting performance.
- Molybdenum (4.70-5.20%): Works synergistically with tungsten to enhance hot hardness, wear resistance, and temper resistance. Improves hardenability and contributes to secondary hardening during tempering.
- Vanadium (1.70-2.10%): Forms extremely hard vanadium carbides that provide exceptional wear resistance. Refines grain structure for improved toughness and contributes to secondary hardening during tempering.
- Cobalt (4.50-5.00%): A critical element that significantly enhances hot hardness and high-temperature strength. Cobalt does not form carbides but strengthens the matrix and stabilizes existing carbides at high temperatures.
- Chromium (3.80-4.50%): Improves hardenability, wear resistance, and oxidation resistance at elevated temperatures. Forms stable carbides that enhance cutting performance.
- Silicon (0.20-0.45%): Improves oxidation resistance and high-temperature strength.
- Manganese (0.20-0.40%): Enhances hardenability and contributes to strength.
Physical and Mechanical Properties
Our 1.2885 Tool Steel Flat Bar offers an impressive combination of physical and mechanical properties that make it ideal for demanding applications:
Physical Properties
| Property | Units | Value |
|---|---|---|
| Density | g/cm³ | 8.10 |
| Melting Range | °C | 1350-1420 |
| Thermal Conductivity (20°C) | W/m·K | 19 |
| Thermal Conductivity (500°C) | W/m·K | 21 |
| Specific Heat Capacity | J/kg·K | 420 |
| Electrical Resistivity | Ω·mm²/m | 0.65 |
| Modulus of Elasticity (20°C) | GPa | 215 |
| Modulus of Elasticity (500°C) | GPa | 175 |
| Coefficient of Thermal Expansion (20-100°C) | 10⁻⁶/K | 9.8 |
| Coefficient of Thermal Expansion (20-400°C) | 10⁻⁶/K | 10.5 |
| Coefficient of Thermal Expansion (20-600°C) | 10⁻⁶/K | 11.5 |
Mechanical Properties (Annealed Condition)
| Property | Value |
|---|---|
| Hardness | 225-275 HB |
| Tensile Strength | 750-850 MPa |
| Yield Strength | 450-550 MPa |
| Elongation | 10-15% |
| Reduction of Area | 25-35% |
Mechanical Properties (Hardened and Tempered to 64-66 HRC)
| Property | Value |
|---|---|
| Hardness | 64-66 HRC (830-880 HV) |
| Compressive Strength | 2800-3200 MPa |
| Transverse Rupture Strength | 2500-2900 MPa |
| Impact Strength (Charpy V-notch) | 5-8 J |
Hot Hardness
1.2885 maintains exceptional hardness at elevated temperatures, which is crucial for high-speed tool applications:
| Temperature (°C) | Hardness (HRC) when initially tempered to 65 HRC |
|---|---|
| 20 | 65 |
| 200 | 64 |
| 300 | 63 |
| 400 | 62 |
| 500 | 60 |
| 550 | 58 |
| 600 | 55 |
| 650 | 50 |
Special Features of FUSHUN METAL's 1.2885 Tool Steel Flat Bar
Our 1.2885 Tool Steel Flat Bar offers several distinctive advantages that set it apart from conventional tool steel products:
Exceptional Hot Hardness and Red Hardness
1.2885 provides superior performance at elevated temperatures:
- Outstanding Hot Hardness: The unique combination of tungsten, molybdenum, and cobalt provides exceptional hardness retention at elevated temperatures up to 650°C (1200°F).
- Superior Cutting Performance: Maintains cutting edge at high temperatures, allowing for higher cutting speeds and longer tool life.
- Excellent Temper Resistance: Resists softening during prolonged exposure to high temperatures.
- Heat Check Resistance: Good resistance to surface cracking from repeated heating and cooling cycles.
- High-Temperature Strength: Maintains structural integrity and resistance to plastic deformation at high operating temperatures.
- Thermal Stability: Minimal dimensional changes during thermal cycling.
- Oxidation Resistance: Good resistance to scaling and oxidation at elevated temperatures.
Superior Wear Resistance
1.2885 delivers exceptional wear resistance for demanding applications:
- Extreme Abrasion Resistance: The high vanadium content forms hard carbides that provide outstanding resistance to abrasive wear.
- Edge Retention: Exceptional ability to maintain sharp cutting edges during prolonged use.
- Adhesive Wear Resistance: Good resistance to galling and metal-to-metal wear.
- Erosion Resistance: Excellent performance against particle erosion at high temperatures.
- Carbide Stability: The carbide structure remains stable at elevated temperatures, maintaining wear resistance.
- Extended Tool Life: Significantly longer service life in high-wear applications compared to conventional tool steels.
- Reduced Downtime: Less frequent tool replacement and maintenance requirements.
Balanced Material Properties
1.2885 offers an excellent combination of properties for demanding applications:
- Good Toughness: Despite its high hardness, maintains adequate toughness for many applications, reducing the risk of premature failure.
- Dimensional Stability: Excellent dimensional stability during heat treatment when properly processed.
- Good Grindability: Despite its high alloy content, can be ground effectively with appropriate techniques.
- Polishability: Can be polished to a high finish for certain applications.
- Machinability in Annealed Condition: Reasonable machinability in the soft annealed state.
- Compressive Strength: Excellent resistance to compressive forces.
- Fatigue Resistance: Good resistance to cyclic stresses, particularly at elevated temperatures.
Manufacturing Excellence
FUSHUN METAL employs specialized processes to ensure our 1.2885 flat bars deliver reliable performance in critical applications:
- Premium Melting Processes: Vacuum melting or electroslag remelting standard for enhanced cleanliness and performance in critical applications.
- Precise Chemical Control: Tight control of alloying elements, particularly tungsten, molybdenum, vanadium, and cobalt, to ensure consistent heat treatment response and mechanical properties.
- Controlled Forging: Optimized forging practices to ensure homogeneous microstructure and uniform carbide distribution.
- Optimized Annealing: Precise annealing cycles to achieve uniform hardness and excellent machinability.
- Stress Relieving: Proper stress relief treatments to minimize distortion during machining and subsequent heat treatment.
- Precision Milling: Advanced milling capabilities to achieve tight dimensional tolerances and excellent surface finish.
- Rigorous Inspection: Comprehensive non-destructive testing to ensure internal quality and surface integrity.
- Carbide Evaluation: Microstructural examination to verify proper carbide size, type, and distribution.
Heat Treatment Recommendations
For customers performing their own heat treatment of 1.2885 tool steel flat bar, FUSHUN METAL recommends the following parameters:
Stress Relieving
- Heat slowly to 650-700°C (1200-1290°F)
- Hold for minimum 2 hours per 25mm of thickness
- Cool slowly in furnace to below 500°C (930°F), then air cool
- Recommended before extensive machining to minimize distortion
Annealing
- Heat slowly to 850-880°C (1560-1615°F)
- Hold for 1-2 hours per 25mm of thickness
- Cool very slowly in furnace at a rate not exceeding 10°C (18°F) per hour to 650°C (1200°F)
- Continue cooling in furnace
- Resulting hardness: 225-275 HB
Hardening
- Preheating: Step 1: 450-550°C (840-1020°F)
- Preheating: Step 2: 850-900°C (1560-1650°F)
- Preheating: Step 3: 1050-1100°C (1920-2010°F) (recommended for complex shapes)
- Austenitizing: 1150-1180°C (2100-2155°F)
- Lower temperatures for better toughness, higher temperatures for maximum hardness and wear resistance
- Holding time: 5-15 minutes after thorough heating (shorter times for smaller sections)
- Quenching options:
- Salt bath: 540-560°C (1000-1040°F), then air cool
- Oil: Preheated to 80-120°C (175-250°F)
- Pressurized gas: For simple shapes and smaller sections
- Vacuum: Excellent option for minimum distortion
- Achievable hardness after quenching: 63-66 HRC
Tempering
- Temper immediately after cooling to room temperature
- Triple tempering essential (minimum three tempers)
- Recommended tempering temperature: 540-570°C (1000-1060°F) for optimal secondary hardening
- Hold at temperature for minimum 2 hours per temper
- Cool to room temperature between tempering cycles
- Achievable hardness after tempering: 63-67 HRC depending on austenitizing and tempering temperatures
- Cryogenic treatment (optional): -70°C to -196°C (-95°F to -320°F) between first and second temper to convert retained austenite and enhance dimensional stability
Surface Treatments (Optional)
- PVD Coating: TiN, TiCN, TiAlN, or other coatings can be applied after final heat treatment to further enhance surface hardness and wear resistance
- CVD Coating: Only recommended in specific cases due to high processing temperatures
- Polishing: For applications requiring high-quality surface finish
Quality Assurance and Testing
Every batch of FUSHUN METAL's 1.2885 Tool Steel Flat Bar undergoes rigorous testing to ensure it meets our exacting quality standards:
- Chemical Composition Analysis: Spectrographic testing to verify precise element content critical for performance, with special attention to tungsten, molybdenum, vanadium, and cobalt levels.
- Mechanical Property Testing: Hardness testing to confirm proper annealing or heat treatment.
- Microstructural Examination: Metallographic analysis to verify proper structure, grain size, and carbide distribution.
- Carbide Assessment: Specialized evaluation of carbide type, size, and distribution critical for performance.
- Ultrasonic Testing: 100% ultrasonic inspection available to detect internal defects and ensure soundness.
- Magnetic Particle Inspection: Available to detect surface or near-surface defects.
- Dimensional Verification: Precision measurement to ensure tight dimensional tolerances.
- Flatness Testing: Verification of flatness to ensure minimal warpage.
- Heat Treatment Response Verification: Sample testing to confirm proper response to hardening and tempering.
- Hot Hardness Testing: Available to verify performance at elevated temperatures.
- Inclusion Assessment: Evaluation of non-metallic inclusion content for critical applications.
- Cleanliness Verification: Microscopic examination to ensure material cleanliness.
Certifications Provided
- Material Test Certificates according to EN 10204 3.1
- Chemical composition analysis
- Mechanical property test results
- Dimensional inspection report
- Heat treatment certification when applicable
- Special property verifications available upon request
- Certificate of conformity to ordered specifications
- Ultrasonic testing reports when specified
- Metallographic examination reports when specified
International Standards Compliance
Our 1.2885 Tool Steel Flat Bar complies with the following international standards:
| Standard | Designation |
|---|---|
| DIN / EN | 1.2885 / ~HS6-5-4-5 |
| AISI | Similar to M35 |
| JIS | Similar to SKH55 |
| ISO | ISO 4957 |
Machining Recommendations
To achieve optimal results when machining 1.2885 tool steel flat bars, FUSHUN METAL recommends the following parameters:
Annealed Condition (225-275 HB)
| Operation | Tool Material | Cutting Speed | Feed Rate | Depth of Cut | Coolant |
|---|---|---|---|---|---|
| Turning | Cemented Carbide P20-P30 | 70-90 m/min | 0.2-0.3 mm/rev | 1-3 mm | Yes |
| Turning | High Speed Steel | 12-18 m/min | 0.1-0.2 mm/rev | 0.5-2 mm | Yes |
| Milling | Cemented Carbide P20-P40 | 60-80 m/min | 0.1-0.2 mm/tooth | 1-4 mm | Yes |
| Milling | High Speed Steel | 10-15 m/min | 0.05-0.15 mm/tooth | 0.5-3 mm | Yes |
| Drilling | High Speed Steel | 8-12 m/min | 0.05-0.10 mm/rev | - | Yes |
| Drilling | Cemented Carbide | 50-70 m/min | 0.1-0.15 mm/rev | - | Yes |
| Grinding | SiC or Al₂O₃ Wheel | 25-30 m/sec | - | 0.005-0.02 mm | Yes |
Grinding Recommendations (Hardened Condition)
| Operation | Wheel Type | Grit | Grade | Wheel Speed | Coolant |
|---|---|---|---|---|---|
| Surface Grinding | Aluminum Oxide | 46-60 | H-I | 25-30 m/s | Abundant |
| Cylindrical Grinding | Aluminum Oxide | 46-60 | H-I | 25-30 m/s | Abundant |
| Internal Grinding | Aluminum Oxide | 60-80 | H-I | 20-25 m/s | Abundant |
| Tool & Cutter Grinding | CBN or Diamond | 100-120 | - | 25-35 m/s | Abundant |
* These values are guidelines only; adjustments may be necessary based on specific equipment and conditions
Machining Tips
- Use rigid setups with minimum overhang to minimize vibration and chatter.
- Apply adequate cooling, especially when machining in annealed condition.
- For complex geometries, machine in the annealed condition before heat treatment.
- Use sharp tools and replace at regular intervals to maintain cutting efficiency.
- After EDM processing, remove the affected layer by grinding to prevent micro-cracking.
- After heavy machining, consider stress relieving to minimize distortion during final heat treatment.
- When grinding hardened material, use gentle cutting conditions and abundant cooling to prevent rehardening of the surface.
- The high tungsten and vanadium content in 1.2885 causes increased tool wear; adjust tooling selection and cutting parameters accordingly.
- Consider using CBN (cubic boron nitride) grinding wheels for more efficient grinding of hardened material.
- Allow extra machining allowance (approximately 0.5mm per side) to compensate for potential distortion during heat treatment.
Welding Recommendations
Welding of 1.2885 is extremely difficult due to its high alloy content and should generally be avoided. If absolutely necessary:
- Preheat: 400-500°C (750-930°F)
- Filler Material: Matching composition or special high-speed steel welding electrodes
- Process: TIG/GTAW only, with highly skilled operators
- Interpass Temperature: Maintain 400-500°C (750-930°F)
- Post-weld Heat Treatment: Essential - full annealing followed by complete rehardening and tempering cycle
- Limitations: Only consider for minor repairs; structural welds not recommended
- Alternative: Consider brazing with high-temperature silver alloys for joining operations rather than fusion welding
Comparative Advantages over Other Tool Steel Grades
Understanding how 1.2885 tool steel flat bar compares to other grades helps in selecting the optimal material for your application:
| Property | 1.2885 | 1.3343 (M2) | 1.3247 (M42) | 1.2344 (H13) | 1.2379 (D2) |
|---|---|---|---|---|---|
| Hot Hardness | Excellent | Very Good | Excellent | Good | Fair |
| Wear Resistance | Excellent | Very Good | Excellent | Good | Very Good |
| Toughness | Moderate | Moderate | Moderate | Very Good | Fair |
| Maximum Hardness | 65-67 HRC | 63-65 HRC | 65-68 HRC | 52-54 HRC | 58-62 HRC |
| Cobalt Content | 4.5-5.0% | None | 8-10% | None | None |
| Machinability (Annealed) | Fair | Good | Fair | Good | Fair |
| Grindability | Fair | Good | Fair | Very Good | Good |
| Typical Applications | High-performance cutting tools, severe hot work | General cutting tools, moderate hot work | High-speed cutting tools, aerospace | Die casting, hot work tooling | Cold work, wear parts |
Application-Specific Recommendations
FUSHUN METAL provides tailored recommendations for specific applications of 1.2885 tool steel flat bar:
Cutting Tool Applications
- Recommended hardness: 64-66 HRC for optimal cutting performance
- For maximum tool life, ensure proper surface finish after grinding (Ra ≤ 0.4μm)
- Consider multiple tempering (minimum 3 cycles) to ensure complete transformation of retained austenite
- For cutting hard materials, consider PVD coating (TiAlN or AlCrN) for enhanced performance
- Maintain proper cutting edge geometry to reduce heat generation
- When regrinding tools, take light cuts with plenty of coolant to prevent surface overheating
- For complex cutting geometries, consider EDM processing followed by careful post-EDM grinding
- Implement proper cooling strategies during cutting operations to maximize tool life
Hot Work Applications
- Recommended hardness: 58-62 HRC for balanced wear resistance and toughness
- For hot punching applications, ensure adequate clearances to minimize mechanical stresses
- Implement proper cooling channels in tooling design to manage temperature distribution
- Consider surface treatments like nitriding for enhanced surface hardness and wear resistance
- For dies subject to thermal cycling, ensure proper stress relieving and preheating procedures
- When using as inserts in larger dies, ensure proper fit and support to prevent movement
- Implement gradual preheating of tools before use to minimize thermal shock
- Regular maintenance including polishing and inspection for cracking recommended
Cold Work Applications
- Recommended hardness: 60-64 HRC for optimal wear resistance
- For deep drawing and forming applications, ensure adequate surface finish to reduce friction
- Consider cryogenic treatment after hardening for maximum dimensional stability
- For punching and blanking applications, maintain proper edge sharpness
- Implement adequate lubrication strategies to reduce friction and wear
- For progressive tooling, ensure proper alignment and rigidity
- When machining threads or complex profiles, ensure stress relief after rough machining
- For high-production applications, consider PVD coating to extend tool life
Customization Capabilities
FUSHUN METAL offers extensive customization options to meet your specific application requirements:
- Custom Dimensions: Special sizes manufactured to exact specifications for your application.
- Modified Chemical Composition: Slight adjustments to standard composition available to optimize specific properties.
- Special Melting Routes: Premium vacuum degassed or electroslag remelted material standard, with additional cleanliness specifications available for critical applications.
- Pre-Machining Services: Basic machining including cutting to length, face milling, drilling, and tapping available.
- Heat Treatment Services: Custom heat treatment to achieve specific hardness levels.
- Surface Treatments: PVD coating, polishing, and other treatments available upon request.
- Specialized Testing: Application-specific testing protocols available upon request.
- Custom Packaging: Specialized packaging for long-term storage or export shipments.
- Edge Preparation: Chamfering and deburring of edges for safe handling.
- Technical Consultation: Expert metallurgical support for your specific application challenges.
- Material Certification: Enhanced certification packages for critical applications.
- Preformed Blanks: Basic pre-forms available to reduce machining time.
Why Choose FUSHUN METAL for 1.2885 Tool Steel Flat Bar
When you select FUSHUN METAL as your supplier for 1.2885 Tool Steel Flat Bar, you partner with a leading manufacturer committed to excellence:
- High-Speed Tool Steel Expertise: Specialized experience in manufacturing premium high-speed tool steel products with optimal properties.
- Advanced Production Facilities: State-of-the-art melting, forging, and processing equipment specifically optimized for high-alloy tool steels.
- Stringent Quality Control: Comprehensive testing and inspection protocols ensure consistent performance in demanding applications.
- Metallurgical Knowledge: In-depth understanding of heat treatment and microstructural control of complex tool steels.
- Supply Chain Reliability: Robust inventory management and production planning to ensure consistent availability of critical materials.
- Technical Support: Expert assistance in material selection, heat treatment guidance, and application support.
- Global Capabilities: Worldwide shipping network with experience in international documentation and compliance.
- Material Traceability: Complete documentation and batch traceability for quality assurance.
- Continuous Improvement: Ongoing research and development in tool steel processing and performance.
- Industry Compliance: Materials and processes that meet or exceed international standards for critical applications.
- Competitive Pricing: Excellent value combined with superior quality and service.
- Environmental Responsibility: Commitment to sustainable manufacturing practices and environmental management.
Request Information
Contact FUSHUN METAL today to discuss your 1.2885 Tool Steel Flat Bar requirements. Our technical team is ready to assist you with:
- Detailed product specifications
- Technical consultations for your specific application
- Heat treatment recommendations for optimal properties
- Custom dimension and processing requirements
- Pricing inquiries and delivery schedules
- Sample requests for evaluation
FUSHUN METAL – Your trusted partner for premium high-speed tool steel solutions that deliver consistent quality, superior hot hardness, and exceptional wear resistance in the most demanding cutting and tooling applications.
