317L 1.4438 SUS317L Austenitic Stainless Steel
- Model
- 317L 1.4438 SUS317L
Item specifics
- Diameter
- 5-180mm
- Delivery Condition
- Cold drawn only, Cold drawn+annealed.
- Surface Condition
- bright, black
Review
Description
Standard
EN 10088-3: 2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN 10028-7: 2007 Flat products made of steels for pressure purposes. Stainless steels
EN 10088-5: 2009 Stainless steels. Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
Chemical composition %
C | Si | Mn | Ni | P | S | Cr | Mo | N |
max 0.03 | max 1 | max 2 | 13 - 16 | max 0.045 | max 0.015 | 17.5 - 19.5 | 3-4 | max 0.11 |
Equivalent grades
EU | USA | Japan | France | England | Sweden | Finland |
EN | - | JIS | AFNOR | BS | SS | SFS |
X2CrNiMo18-15-4 | 317L | SUS317L | Z3CND19-15-04 | 317S12 | 2367 | 770 |
Mechanical properties
Rm - Tensile strength (MPa) (+A) | 500-720 |
Rm - Tensile strength (MPa) (+AT) | 490-690 |
Rp0.2 0.2% proof strength (MPa) (+A) | 200-240 |
Rp0.2 0.2% proof strength (MPa) (+AT) | 220 |
KV - Impact energy (J) transverse, (+A) | +20° / 60 |
KV - Impact energy (J) longitud., (+A) | +20° / 100 |
A - Min. elongation at fracture (%) (+A) | 35-40 |
A - Min. elongation at fracture (%) longitud., (+AT) | 35 |
Brinell hardness (HB): (+A) | 215 |
Brinell hardness (HB): (+AT) | 200 |
